Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual do Utilizador descarregar pdf (Página 62)

Displayed Alarm /

Warning

Device Description Recommended Actions

Pump Communication Fail TPI Communication from the TPI to

the STP controller has failed.

Check all wiring connections and ensure that there is power supplied

to the Smart Controller.

Pump In Water TPI The water level has risen to within

3 inches of the programmed intake

level.

Ensure proper programming of the TPI and calibration of the Smart

Controller. If correct, have water removed from the tank

Relay Fault TPI The STP controller is reporting a

relay fault error.

Refer to the applicable Smart Controller Installation guide for details.

Short Circuit TPI The STP controller is reporting a

short circuit condition.

Unbalanced Load TPI The STP controller is reporting an

unbalanced load condition.

Unbalanced Voltage TPI The STP controller is reporting an

unbalanced voltage condition.

Under Voltage TPI The STP controller is reporting a

voltage level under 200VAC.

Under Load TPI The STP controller is reporting an

underload condition.

Unknown Fault TPI The STP controller is reporting an

unknown fault code.

Check fault condition on Smart controller and contact FFS Technical

Services for more information

Printer Alarms

Check Printer

(Thermal Printer Only)

Printer Printer is out of paper, or the

printer door is open.

Make sure the printer has paper, and the printer door is closed

completely.

Printer Door Open

(Impact Printer Only)

Printer The system has detected the

printer door is open

Check to make sure the printer door is closed.

Printer Head

Temperature

(Thermal Printer Only)

Printer Print head high temperature

persists for at least 2 minutes

Printer will resume printing and the alarm will clear after a short cool-

down period. Keep the console area cool and ventilated. If the alarm

does not clear, contact FFS Technical Support.

Printer Motor

Temperature

Printer Printer motor has exceeded

temperature limit

Allow printer to cool. Keep the console area cool and ventilated. If the

alarm does not clear, contact FFS Technical Support.

Printer Paper Jam

(Impact Printer Only)

Printer Indicates that paper is jammed in

printer.

Carefully lift printer cover to inspect and remove the jammed paper.

1 2 ... 57 58 59 60 61 62 63 64 65 66

Comentários a estes Manuais

Sem comentários

Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual do Utilizador Página 62

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Franklin-fueling-systems T5 Series Fuel Management System Programming Guide