Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual do Utilizador descarregar pdf (Página 48)

15. Under Dispenser Interface, select Fueling Points.

Note: A Fueling Point is anywhere a vehicle can stop and dispense fuel. Most dispensers have two fueling points. (front

and back).

16. Select the Number of Fueling points from the drop down list.

17. Under Fueling Points, select Fueling Point 1.

18. Select the Number of Hoses from the drop down list.

Note: Hose is dened as “each type of product that can be dispensed from a fueling point” A fueling point with only one

physical hose, but three available grades, would be entered as Number of Hoses = 3.

19. Under Fueling Point 1, select Hose 1, then Grade Association.

20. Select from the drop down menu the grade associated with Hose 1. Click OK.

21. Select Position.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 65 66

Sem comentários

Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual do Utilizador Página 48