Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual do Utilizador

ColibriTank Monitoring SystemCL6 SeriesSet-Up and Operator’s GuideFranklin Fueling Systems • 3760 Marsh Rd. • Madison, WI 53718 USATel: +1 608 838 878

10Select each grade and assign a name (i.e. Unleaded Regular).4. Enter the number of fueling points. In this example there are 4.5. Select Fueling Po

11This action will copy the grade association and position information to the other Fueling points.Next Screen[Setup] / Fuel Management SystemParamete

12 [Setup] / Fuel Management System / Static Tank TestingParameter Name Parameter Value Description ValueRegion United States Choose United States, Sp

13 [Setup] / Fuel Management System / Tanks / Tank 1 / LimitsParameter NameParameter ValueDescription ValueHigh High Product (Level) Limit(63.5 liter)

14[Setup] / Fuel Management System / ProductsProduct #Name (Product 1)Enter Product nameabc#Type (Unleaded Regular)Select type of fuel Unleaded Regula

15E-Mail Setup[Setup] / E-MailNote: This is only needed if you have an Ethernet connection and want the system to send e-mail messages.Parameter Param

16RulesRules associate an event (i.e. alarm, delivery, tank test, etc.) with an action (i.e. activate relay, e-mail, sound, etc.).[Setup] / RulesList

17OperationCheck Inventory Select the tank.View or print tank information.Check DeliveriesChoose the tank or manifold (Tanks shown)

18AlarmsThis will bring up a list of current or active alarms. Refer to Appendix A, Alarm Table.Print ReportsChoose the type of report. This shows man

19Web Browser InterfaceConnecting to the ConsoleTo use the Web Browser Interface, the console must be connected to a computer. You can connect to the

2Important Safety MessagesThis equipment is installed close to gasoline and diesel fuel. Working in such a hazardous environment presents a risk of se

20 Open the computer’s internet browser and put the console’s IP address into the address bar of the browser.A screen should open similar to tha

21Web Interface Available PagesThe following pages can be viewed in order to see data and perform control functions. Several pages and functions are c

22Appendix A: List of AlarmsFMSTank/Manifold AlarmsDisplayed Alarm Description Recommended ActionsCorrection Table ErrorCorrection

23FMSProbe AlarmsDisplayed Alarm Description Recommended ActionsFloat Height ErrorA oat on the probe listed with the alarm is being monitored at a v

24FMSSpecial Product AlarmsDisplayed Alarm Description Recommended ActionsAlpha Volume Correction ErrorThese Alarms refer to temperature correction c

25Appendix B: Standard Tank TableLegendO/C = Owens Corning / FC Fluid ContainmentD = Diameter (Dia.)L = LengthS = Single WallDW = Double Wall Tank (DW

26Type #Manufacturer Model Capacity (Gallons)DimensionsD x L (inches)S / DW Wall25 Xerxes — 2,000 76 x 166 DW26 Xerxes — 2,000 75 x 144 S27 Xerxes —

27Appendix C: Compatible Printers Hewlett Packard Compatible PrintersColibri consoles have a standard Type-A USB socket on the bottom of the console.

28Appendix F - Using the Console’s Autocalibration FeatureUsing the Autocalibration Feature on an FFS Tank GaugeIntroductionAutocal is a feature of th

29To See If a Tank Is Autocal Ready• Use the previous month’s DIM Reconciliation Report to look for explanations for the Over / Short status. A typi

3ContentsImportant Safety Messages ...2Basic Console Operatio

30Starting AutocalWhen Autocal starts, it will need a reference volume as the starting point for the calibration. The default reference volume will be

315. The following message will be displayed “Do you want to enter a reference volume for the autocalibration?” 6. Select OK and enter a reference v

©2009 FFS 000-2155 RevA

4Basic Console OperationThe console can be operated through the LCD touch screen or the Web Browser Interface via a Personal Computer. Refer to to pag

5Data EntryIf you are prompted to enter information, a keypad and edit buttons will be displayed.Character Selection: Selects between upper case lette

6Set up Preferences Display Description ValuesChoose language for console menus.Choose date and time display formatChoose format of numbersChoose unit

7Display Description ValuesLists detail about the ConsoleLists System ParametersLists options enabledDisplay Description ValuesTo Silence the annuncia

8Entering Setup Always enter information starting from the top of the menu. Later menus use this information. Note that the tables are formatted to

9[Setup] / Dispenser InterfaceNote: The Dispenser Interface allows the console to read dispensing information and requires the TS-TRAC option. Dispens