Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual do Utilizador descarregar pdf (Página 12)

[Setup] / Fuel Management System / Static Tank Testing

Parameter Name Parameter Value Description Value

Region United States Choose United States, Spain or Other (regulatory) abc#

Monthly Leak Test

Threshold

(0.21) Set static leak tolerance for monthly testing tanks. # cc/sec

Yearly Leak Test

Threshold

(0.11)

Set static leak tolerance for yearly testing tanks.

# cc/sec

Sentinel Mode

Threshold

(3.15)

Set static leak tolerance for Sentinel Mode.

# cc/sec

Condence (99%) Leak testing condence. 90, 95, 97.5,

99 %

Minimum Leak Test

Time

(2 hr)

Minimum amount of time used to test.

0-8

Maximum Leak Test

Time

(8 hr)

Maximum amount of time used to test.

1-8

Alarm On Precision

Leak Test Failure

(No)

Yes will produce an alarm upon leak test failure.

Yes/No

[Setup] / Fuel Management System / Tanks

Parameter Name Parameter Value Description Value

Name (Tank 1) Given name of tank. abc#

Type (Special 1) Type of tank. Std./Spcl.

Manifolded (No)

Part of a tank Manifold?

Yes / No

Product # (1) Product # In tank 1-48

Delivery Threshold (757.1 liter) Level increase needed to signal delivery >0.3

Theft Threshold (18.9 liter)

Level decrease needed to signal theft. Note: console

must be in Sentinel Mode

>0.3

Monthly Compliance Yes

Track this tank under monthly section of compliance

page.

Yes / No

Annual Compliance Yes

Track this tank under annual section of compliance

page.

Yes / No

Probe

(See below)

Limits

(See below)

[Setup] / Fuel Management System / Tanks /

Tank 1 / Probe

Parameter

Name

Parameter Value Description Value

Channel (Probe 1) Channel used for the probe in tank. Probe

Type (Standard 29) Type of probe used in this tank. Std./Spcl.

Ratio (1 to 1 tip to head) Ratio of product level movement in proportion to

the oat

1:1; 7:1; 9:1

Float Type (4 in gas) Type of oat(s) used on probe. 4, 3, or 2 in.

Gas/Diesel,

Stainless,

LPG, Density

Water Float Yes Indicates if water oat is on probe. Yes / No

Gradient (8.99046 µs/mm) Speed of probe wire. # µs/mm

Product Offset (0.00 mm) Used for compensation of tank tilt. # mm

Water Offset (0.00 mm) Used to compensate for debris on tank bottom. # mm

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentários a estes Manuais

Sem comentários

Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Franklin-fueling-systems Colibri CL6 Setup and Operators Guide